Products
IPQ6000 802.11AX AX1800 Gigabit Ports Wifi 6 5G Router Powerful Industrial Outdoor IP67 enclosure
Wifi 6 and 5G router, Z6001-M.2-H, with IP67 housing, mainly for outdoor using, adopting IPQ6000 chipset, 1 WAN and 3 LAN Gigabit Ports, 1800Mbps Gigabit ports, powerful performance.
| Processor | IPQ6000, 4-Core ARM Cortex A53s CPU, 1.2GHZ Main Frequency |
| 2.4GWIFI chipset | QCN5022, IEEE 802.11ax/n/g/b,Speed up to 573.5Mbps,2T2R |
| 5.8GWIFI chipset | QCN5052 IEEE 802.11ax/ac/a,Speed up 1201Mbps,2T2R |
| Ram | DDR3 256MB(One DDR matches 32bit firmware） |
| Flash | 128MB NAND FLASH |
| Ethernet Port | WAN*1, 1000Mbps(Auto MDI/MDIX),IEEE 802.3/802.3u/802.ab |
| LAN*3, 1000Mbps(Auto MDI/MDIX, IEEE 802.3/802.3u/802.ab | |
| Power Port | DC5.5*2.1MM |
| Buttons | Reset Button* 1, MESH Button*1 |
| Antennas | Onmidirectional External 5dbi 2.4G antennas*2 |
| Onmidirectional External 5dbi 5.8G antennas*2 | |
| SIM Card | Standard SIM card Slot *1, Support SIM/USIM |
| Antennas | Omnidirectional 3dbi 2.4G antenna*2 |
| Omnidirectional 3dbi 5.8G antenna*2 | |
| Omnidirectional 3dbi 5Gantennas*4, support 4G/3G/2G bands | |
| M.2 Slot | Built-in M.2*1, Support USB3.0 and PCIE Bus, support 5G module |
|
MESH LED |
1. The red light is on during the boot process, the boot is complete, the red light is off and the green light is on 2. Press the mesh button to enter the mesh pairing state, the green light flashes once a second, and the other lights are off 3. The main equipment network is normal, the green light and blue light are on at the same time (cyan) The slave device MESH is successfully connected, and the distance is longer, the green light and the red light are on at the same time (orange), the distance is suitable for the green light and the blue light is on at the same time (cyan) |
| WAN LED | When connecting the WAN ports, the LED light will be always on, and the LED will be flashing when there is data communication |
| LAN1 LED | When connecting the LAN ports, the LED light will be always on, and the LED will be flashing when there is data communication |
| LAN2 LED | When connecting the LAN ports, the LED light will be always on, and the LED will be flashing when there is data communication |
| LAN3 LED | When connecting the LAN ports, the LED light will be always on, and the LED will be flashing when there is data communication |
| POWR LED | when the power supply is normal, the power indicator is always on, and it won’t be on when the power supply is abnormal. |
This hardware product is designed with a hardware watchdog function. The hardware watchdog will automatically turn on after power-on, and detect the heartbeat level output by the routing system that jumps once per second. If the routing system itself fails (such as a crash), it will also Naturally, the heartbeat level can no longer be output. At this time, if the hardware watchdog does not detect the heartbeat level within 120 seconds, it will shut down itself for 15 seconds and then restart the entire system.
| Hardware watchdog specific functions | |
| Routing system is abnormal | Module dialing abnormal |
| Restart the whole system | Only restart the module |
Skype: zbt12@zbt-china.com
Whatsapp/phone: +8618039869240
