Products

300mbps 2.4G single band 10GB free ESIM data global wireless 4G router,
China Lte Cpe 4g, WE826,

Simple Introduction

ZBT WE5927 is a 4G routing product for home used. It accesses the Internet through 4G mobile communication dial-up or 100Mbps WAN port dial-up, and then shares the wireless WiFi and internet network to user or device.

And also,it can be supported wired Ethernet .Customers can be connected WAN port by wired Ethernet cable to share wireless WiFi and wired network to user or device.

Selling point

●Adopt MT7628NN chipset,MIPS24KEc architecture CPU，main frequency is up to 580MHZ

●Support 2.4G, rated up to 300Mbps

●Support 802.11 N/G/B protocols.

●MT7628NN chipset integrates 64MB DDR2, match with 8MB Nor Flash

●1*WAN and 3*LAN 100Mbps adaptive network port, support automatic flip（Auto MDI/MDIX）

●Support “one-click flash mode”，Long press the reset button to boot and then will enter the rescue flash mode

●Built-internal 4G module to support 3G&4G function,

●One standard SIM card slot, support SIM/USIM card

●External high gain omnidirectional antenna with 360^o wireless signal

●This product supports hardware watchdog function, when the routing system fails, it will restart the device automatically.

Hardware interface introduction

Indicator light introduction

Hardware watchdog function introduction

This hardware product has designed the hardware watchdog function. The hardware watchdog will automatically turn on after power on.And detect the heartbeat level output by the routing system once every 1 second. If the routing system itself fails (such as a crash), it will not be able to output the heartbeat level. At this time, if the hardware watchdog has not detected a heartbeat within 120 seconds Level, it will automatically shut down, restart the entire system in 15 seconds.

The routing system can independently control the power supply of each 4G module. When the routing system detects any module dialing failure, it will automatically power off the failed 4G module, and then power on again to restart the 4G module.

4G mobile communication function

This product has been SMT one 4G module to support 4G mobile communication functions. Adapter USB2.0 bus. Changing different 4G modules can support the 4G frequency bands of different countries. For more detailed 4G functions, please contact Zhibotong customer service, and refer to the specification of 4G module.

Description of power supply and power consumption

Please use the ZBT standard power adapter to supply power for this product. If you do not use the ZBT standard power adapter, please strictly follow the above power supply specifications to supply power for this product, otherwise it will damage the product. If you use batteries or vehicle power supply, please be sure to take anti-static and anti-surge measures.

WIFI Wireless parameter introduction

Compatible with IEEE 802.11 b/g/n, support IEEE 802.11 d/h/k; support 20MHz, 40MHz, using 2T2R MIMO antenna technology, the maximum connection rate is up to 300Mbps. The following is a description of the transmission power of 2.4G WIFI , reception sensitivity, and power frequency .

1.10GB free ESIM data package usage
2.1 WAN 4 LAN 100M adaptive network port, support automatic flip
3. Using high-speed 128MB DDR2, with 16MB Nor Flash
4. Brass four antennas, double the signal receiving ability
5. Insert the 4GSIM card, connect the power to enjoy the 4G WiFi network, or use wired Internet access.
6. Strong performance and wide application, using MTK7620A solution, MIPS24KEc architecture CPU, the main frequency is up to 580MHZ, providing stable performance of 300mbps, easy to play games online and work.
7. A variety of security strategies to protect network security. Support ARP double protection, can resist DOS attack, scanning attack and suspicious packet attack, MAC address filtering, effectively protect enterprise network security.

Skype: zbt12@zbt-china.com

Whatsapp/phone: +8618039869240